Quantum StorNext M660 - Stornext Operations

Chapter 3: Basic System Operations
Additional Common Operations
74 StorNext M660 Metadata Appliance Hardware Guide
11 To update the firewall rules for the MDC node operating as the
primary, type the following:
StorNext Operations For more information on performing advanced StorNext operations,
refer to the following within this document or by accessing documents
from the StorNext M660 GUI:
• For information on how to monitor the hardware components for
both MDC nodes, refer to the “The Hardware Status Report” section
of the latest version of the
StorNext User’s Guide .
• For instructions on how to capture system state logs and support
bundles, refer to the “The Capture State Function” section of the
latest version of the
StorNext User’s Guide .
• For instructions on how to capture DSET logs, refer to the “Capture
DSET” section of the latest version of the
StorNext User’s Guide .
• For information on changing the network configuration, refer to the
“Step 3: System” section of the latest version of the
StorNext User’s
Guide
.
• For information on setting up the distributed data mover (DDM)
feature, refer to “Distributed Data Mover (DDM)” section of the
latest version of the
StorNext User’s Guide .
• For information on StorNext Advanced Reporting, refer to the
StorNext Advanced Reporting User’s Guide .
The
StorNext User’s Guide also contains chapters such as these, which
you will find useful:
• StorNext File System Tasks
• StorNext Storage Manager Tasks
• StorNext Reports
• Service Menu Functions
vip_control
/opt/DXi/scripts/netcfg.sh --reset_snvip