Chapter 3: Basic System Operations
Upgrading Firmware
62 StorNext M660 Metadata Appliance Hardware Guide
Example (based on the previous table): If you were upgrading the
StorNext firmware from 4.6.1 to StorNext 5 Release 5.1.1, the array
firmware would be upgraded from 07.80.55 to 08.10.13. This is a
downtime upgrade.
4.7.0.1 07.84.46
4.7.0 07.84.46
4.6.1 07.80.55
4.6 07.80.55
4.3.3 07.80.55
4.3.2 07.80.55
4.3.1 07.80.55
4.3.0 07.80.55
4.2.2.0.1 07.75.17
* Note: Some StorNext releases are not supported upgrade paths to
StorNext 5 releases. Please consult the StorNext 5 Compatibility
Guides and/or older StorNext Compatibility Guides applicable for the
StorNext Release you wish to upgrade to, in order to determine
upgrade availability.
StorNext Release* Array Firmware Version
To Next Page
Loading...
