CLEANING AND CARE
Harmony Ball Return Manual – 400-254-022 35 Rev. Date 3/16
9.0 CLEANING AND CARE
9.1 BALL RACK TRAY
To clean the tray, spray with a stainless steel cleaner and wipe dry. Repeat as needed.
QubicaAMF recommends STAINLESS STEEL CLEANER – 254-001-208.
To eliminate wear marks and stains, rub a Heavy Duty Scotch-Brite™ scouring pad in the
direction of the grain to rejuvenate the finish.
9.2 BALL RETURN HOOD
For general cleaning, wipe with a damp cloth using warm water. To restore and protect the
surface, periodically apply an automotive vinyl dressing. To remove stains, use an all-purpose
cleaner with a clean cloth or soft brush. For more difficult stains, carefully use bleach or
acetone.
To Next Page
Loading...