Queclink GL300W User Manual

GL300W External Battery Kit User Manual
GL300WEBKUM001 -22-
Table 11: +RESP:GTOMS Message Format
Example:
+RESP:GTOMS,1A0100,135790246811220,,1,0,0,4.3,92,70.0,121.354335,31.222073,20090214
013254,0460,0000,18d8,6141,00,20100214093254,11F0$
Parameter Length(byte) Range/format Default
Protocol version 6 XX0000 – XXFFFF,
X∈{'A'-'Z','0'-'9'}
Unique ID 15 IMEI
Device name 10
Type 1 0|1
State 1 0|1|3
GPS accuracy 1 0 0
Speed <=5 0.0 – 999.9km/h
Azimuth <=3 0 – 359
Altitude <=8 ±XXXXX.X m
Last longitude <=11 ±XXX.XXXXXX
Last latitude <=10 ±XX.XXXXXX
GPS UTC time 14 YYYYMMDDHHMMSS
MCC 4 0XXX
MNC 4 0XXX
LAC 4 XXXX
Cell ID 4 XXXX
ODO mileage <=9 0.0 – 4294967.0Km 0
Send time 14 YYYYMMDDHHMMSS
Count number 4 0000 – FFFF
Tail character 1 $ $
 <Type>: defines motion sensor is enabled or disabled.
 0: motion sensor is disabled.
 1: motion sensor is enabled.
 <State>: defines motion sensor state.
 0: motion sensor detects rest and its logical.
 1: motion sensor detects movement.
 3: motion sensor is in initial status.
 <
ODO mileage >: If the <ODO enable> in AT+GTCFG command was setted to 1, the bit will
be filled with ODO mileage, otherwise, the bit will be reservered.
6.2.4. GTRST
If SW102 is set to ‘L’, the PCU will send +RESP:GTRST message to the backend server every 24
hours.
Table 12: +RESP:GTRST Message Format
Queclink
Confidential

Queclink GL300W Specifications

General

Brand	Queclink
Model	GL300W
Category	GPS
Language	English