Quectel BC660K-GL - Electrostatic Discharge

NB-IoT Module Series
BC660K-GL Hardware Design
BC660K-GL_Hardware_Design 46 / 57
5.3. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module’s electrostatic discharge characteristics.
Table 27: Electrostatic Discharge Characteristics (25 ºC, 45 % Relative Humidity)
Tested Interfaces
Contact Discharge
Air Discharge
Unit
VBAT, GND
±5
±10
kV
Antenna interface
±5
±10
kV
Other interfaces
±0.5
±1
kV