Quectel EG06 Series

LTE-A Module Series
EG06 Hardware Design
EG06_Hardware_Design 18 / 89
3 Application Interface
3.1. General Description
EG06 is equipped with 299-pin LGA pads that can be connected to cellular application platform.
Sub-interfaces included in these pads are described in detail in the following chapters:
 Power supply
 (U)SIM interface
 USB interface
 UART interfaces
 PCM and I2C interfaces
 ADC interfaces
 Network status indication
 PCIe interface*
 WLAN control interface*
 SD card interface
 USB_BOOT interface
“*” means under development.
NOTE