WARNING!
• If you are in any doubt about the performance requirements
of your wheelchair contact your Sunrise Medical authorised
dealer.
• After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning correctly
before it is used.
• A complete inspection, safety check and service should be
made by a Sunrise Medical authorised dealer at least once
per year.
• All fasteners must be replaced like for like using the correct
length, tensile strength and materials.
Maintenance & Inspection Schedule
Daily*
Weekly
Monthly
Quarterly
Annually
Check battery level indicator and charge if necessary
¯
Check the joystick of the hand control is not bent or damaged
¯
Ensure all parts and assemblies are securely fastened
¯
Check anterior pelvic support for wear and make sure the buckle is
operational
¯
Motor Brake Test
¯
Check tyre condition and wheel fasteners.
¯
Ensure lights and indicators, (where fitted), are operational and clean
¯
Ensure all cables and connectors are sound and are tidy and out of
the way
¯
Check upholstery, seating, headrests, arm pads and calf pads for
wear.
¯
Inspect all nuts, bolts, studs and fasteners for damage and tightness.
Contact your authorised dealer for service assistance.
¯
Clean wheelchair upholstery
¯
Check Front Castor Arms Safety Lock for correct operation.
¯
Check battery terminals for tightness etc.
¯
Complete inspection, safety check and service should be made
by a Sunrise Medical authorised dealer
¯
Daily = Before each use of the wheelchair.
*
• When replacing self-locking nuts, or nuts/studs secured
with a thread locking solution, ensure that a suitable thread
locking solution is reapplied to the fastener.
• Check all Velcro fastening straps for correct adhesion when
pressed together.
• Ensure that any contamination, such as fluff, hair,etc is
removed from the Velcro straps. Such contamination may
affect adhesion.
To Next Page
Loading...
Need help?
General
