Quicksilver 555 Pilothouse - Exterior Seating

Quicksilver 555PH — System & Component Overview and Operaon
29
base into the groove located on the port and starboard seat risers. Next, slide the backrest into the
groove located on the vercal wall in the a cabin.
15. Exterior Seang
Located in the a part of the cockpit, there is a port and starboard jump seat. On a standard boat,
both jump seats are removable for addional cockpit space. To install the jump seats, set the base on
the deck so that it locks into the catches located on the boom of the seat base. Next install the cush-
ion onto the seat base and the backrest cushion onto the seat back wall.
If your boat comes with a livewell, the port jump seat is replaced by the livewell tub. The seat cushion
now aaches to the livewell lid.
Interior Seang Conguraons
Center Jump Seat Installaon
Starboard bucket seat
Port xed seat
Port bucket seat
Center jump seat
Standard Conguraon
Oponal Conguraon
Center jump seat base
Center jump seat cushion
Center jump seat backrest base
Center jump seat backrest cushion