EasyManuals Logo

Quicksilver 555 Pilothouse User Manual

Default Icon
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Quicksilver 555PH— Electrical Systems
33
1. DC Electrical System
The DC electrical system is powered by a baery, and is kept charged by the engine driven alternator.
2. Baery
Refer to your engine owner’s manual for exact baery requirements.
To remove the baery cables:
1. Turn o all items drawing power from the baery.
2. Turn the baery switch to the OFF posion.
3. Remove the negave cable rst, then the posive cable.
To replace the cables, install the posive cable rst, then the negave cable.
3. Baery Box
The baery box, located in the starboard bilge, houses the baery. This box can be accessed via the
a center cockpit oor hatch. The baery can be installed or removed by loosening the strap and
removing the lid on the baery tray. It should always be installed and secured within the baery box
installed on your boat. This will ensure that the baery will not move around while the boat is
underway.
4. Baery Switch
Your vessel is equipped with a baery switch to control the delivery of DC power from the baery.
The baery switch is located on the a cockpit wall. When you turn the baery switch to the ON
posion, power is provided from the baery to the enre boat. To turn on power, rotate the switch
clockwise 90 degrees to the ON posion.
NOTE: Never operate or turn o the baery switch when the engine is running as it may cause
damage to electronic components on the boat. Always operate the switch with the engine and
accessories o.
Never use an open ame in the baery storage area. Avoid
striking sparks in the baery area.
Always disconnect the baery before doing any work on the
electrical system. Never turn o the baery switches or
disconnect the baery cables while the engines are running.
The bilge pump sll draws power from the baery, even if
the switch is set to OFF. This is especially important for the
bilge pump, so that it can operate anyme excess uid
accumulates in the bilge, which can occur when the boat is
docked and unaended.
Never work on the electrical system while the system is
energized. Never leave the cra unaended with the
electrical system energized.
Baery Switch Operaon
OFF Posion
ON Posion

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quicksilver 555 Pilothouse and is the answer not in the manual?

Quicksilver 555 Pilothouse Specifications

General IconGeneral
BrandQuicksilver
Model555 Pilothouse
CategoryBoats
LanguageEnglish

Related product manuals