Quicksilver 855WE User Manual

41
Quicksilver 855WE — System & Component Overview and Operaon
Wear the lanyard at all mes when operang the boat. Use
it to stop only in an emergency. DO NOT use it to shut o
the engine during normal operaon
Emergency Engine Shutdown Switch
Ignion shutdown safety switch
Switch clip (aached to switch)
Lanyard
Switch clip (aached to operator)
On/resume buon
O buon
Prole selecon
Acve trim keypad
Acve Trim
15. SmartCra
TM
System Gauges
The instrument package on your boat includes a SmartCra
TM
tachometer and speedometer mul-
gauge system. By pressing the “mode” buon on the gauge, specic informaon vital to the safe
operaon of the vessel can be displayed. Refer to your SmartCra
TM
gauge owner’s manual for
specic informaon on how to get the most out of the mul-gauge display.
In addion, Quicksilver® oers an oponal factory installed single or twin screen GPS along with
Mercury’s Vessel Link system. If installed, the same engine data that you see on your SmartCra
TM
gauges can be displayed on your GPS. Refer to the GPS owner’s manual for more specic informaon
regarding instrucons and warranty.
16. Acve Trim (oponal)
Your boat may come equipped with the Acve Trim system from Mercury. Acve Trim automacally
adjusts the engine trim based on boat speed to opmize performance and fuel economy. The system
allows for the owner to either use the default system programmed, or create their own trim prole.
At anyme the user can override the automac trim system by simply pressing the trim buon on the
shier.
The Acve Trim keypad is located on the starboard side of the dash below the shiers. Refer to the
manufacturer’s manual for complete instrucons and warranty.

Quicksilver 855WE Specifications

General

Brand	Quicksilver
Model	855WE
Category	Boat
Language	English