Quicksilver 855WE — Electrical Systems
65
8. Baery Charger
When turned ON, the baery charger automacally increases current output when there is a drop in
baery voltage. All baeries, including the bow thruster baery, are connected to the baery
charger. When the baeries are charged, the unit maintains a small current ow to keep the baeries
fully charged and ready for service without overcharging.
9. Electrical Schemacs
This owner’s manual contains electrical schemacs and wiring harness illustraons for your boat.
These electrical schemacs were generated by the Electrical Engineering Department for technical
reference and service technicians. Quicksilver® does not recommend that you aempt to work on
the boat’s electrical system yourself. Instead, we recommend that you take your boat to your local
authorized Quicksilver® dealer for service. Quicksilver® reserves the right to change or update the
electrical system on any model at any me without noce to the consumer and is not obligated to
make any updates to units built prior to the change.