Quicksilver 855WE User Manual

Quicksilver 855WE — System & Component Overview and Operaon
52
Interior Dinee
A Facing Posion
Forward seat base
Forward seat storage
A seat base
A seat storage
Dinee table
Table leg
Table base
Port dinee seat
Filler board
Filler cushion
available under both seat bases. The forward seat base arculates and the removable backrest allows
for mulple seang conguraons.
Located on the port side, there is a folding seat that increases the amount of seang opons at the
dinee. To use, simply pull the seat base and rotate it 90 degrees. Located on the center of the
forward and a seat bases, there is a rotang support ledge used to lock the port seat base into place.
Rotate the support ledge 180 degrees and rest the port dinee seat base on the ledge.
To install the table, push and lock the table leg into the base plate. Next, place the table onto the table
leg. The table is hinged to all easy access to the seang. When not in use, the table and table leg is
stored in the forward berth storage area under the maress.
To convert to a sleeping berth, rst remove the table and table leg. Next rotate the port dinee seat
to the up posion. Now, install the ller board by folding down the support legs on the boom of the
ller board and placing the board next the port seat base. When not in use, the ller board is stored in
the forward berth storage area under the maress.
Forward Facing Posion
Table Sleeping Berth

Quicksilver 855WE Specifications

General

Brand	Quicksilver
Model	855WE
Category	Boat
Language	English