Quicksilver 875SD

Quicksilver 875SD — Electrical Systems
59
7. Galvanic Isolator (oponal)
The AC system is equipped with a galvanic isolator, which blocks low voltage DC on the shore power
ground wire.
The galvanic isolator prevents dockside voltages from damaging metal parts on the boat that come in
contact with the water. The galvanic isolator will also safely conduct high currents to ground in the
event of a short circuit or power leakage on your boat. Refer to the manufacturer’s manual in your
owners manual packet for complete instrucons and warranty on the galvanic isolator.
Do not allow shore power cable end to hang in water. An
electrical eld can result which can cause injury or death to
nearby swimmers.
To minimize shock and re hazards turn o cra’s shore
power connecon switch before connecng or
disconnecng shore power cable, connect shore power
cable to cra’s inlet before connecng to shore power
source, disconnect shore power cable at shore power rst,
and close shore power inlet cover ghtly.
AC System Layout
Shore power inlet
Galvanic isolator
Shore power panel
Baery charger
Entertainment center outlet
Electric grill
Head outlet
Air condioner
Water heater
Microwave
Interior galley outlet
Main baery system
Bow thruster baery system