If an alarm is active, it can be viewed by tapping the alarm message. To reset an alarm, tap the
reset button (1).
Before remedying, consult the Safety precautions.
Before resetting a warning or shutdown message, always solve the problem. Frequently
resetting these messages without remedying may damage the unit.
Inputs menu
Tap the Inputs icon to enter the Inputs menu.
This menu shows information about all the inputs.
Outputs menu
Tap the Outputs icon to enter the Outputs menu.
Instruction book
9829 3199 74 31
This menu shows the current status of the unit.
Figure 8: Status menu screen
Figure 9: Inputs menu screen
Figure 10: outputs menu screen
This menu shows information about all the outputs.
To Next Page
Loading...
Need help?
General
