QUORION QMP 5000 User Manual

13
2.4.4 Adapter Cable for RS232
To connect standard peripheral devices you will need an adapter cable from the RJ-interface of the
QMP 5000 series to the D-SUB connector of the external device. Connect the original cable of the
device to the D-SUB connector of the adapter and put the other end of the adapter in the interface
socket of the QMP 5000.
You can order the special adapter cable from your local QUORION dealer. If you want to make the
connection yourself, please note the following specifications:
QMP (RJ45) QMP (DSUB9 male)
VCC Pin 1 Pin 1 --
RxD Pin 2 Pin 2 RxD
TxD Pin 3 Pin 3 TxD
DTR Pin 4 Pin 4 DTR
GND Pin 5 Pin 5 GND
DSR Pin 6 Pin 6 DSR
RTS Pin 7 Pin 7 RTS
CTS Pin 8 Pin 8 CTS
Pin 9 VCC
SHLD SHLD SHLD SHLD

QUORION QMP 5000 Specifications

General

Brand	QUORION
Model	QMP 5000
Category	Cash Register
Language	English