41
12.1 Power Supply and Interfaces
Please use the delivered power supply for the QMP 5000 series only. The usage of other power
supplies may damage your POS system. No liability is accepted for such damages.
The interface connections should only be plugged if the system is switched off. Please note also
the maximum cable lengths of 5 meters for USB and 15 meters for RS232.
12.2 Cleaning
To clean your QMP 5000 series please use a lint-free dry or slightly damp cloth only. Disconnect
the system from the power supply before cleaning. Do not use any abrasive substances or agents
containing solvents.
Special caution is required when cleaning the display. Be careful not to scratch the surface and
prevent any liquids from entering the housing.
In case of heavy pollution you may also use a damp cloth to clean the touch surface. Please use
only warm water or a special screen cleaner to damp the cloth. Never put the liquid directly on the
screen, but only on the cloth. The cloth should only be damp, but not wet!
The touch screen may only be touched with fingers. Do not use any pens, pencils or other sharp
objects which can scratch the surface. No liability is accepted for such damages.
12.3 Service and Maintenance
The QMP 5000 series do not contain any components, which can be serviced or repaired by the
user. Please have all maintenance performed by a qualified QUORION dealer. Unauthorized
manipulations may lead to a loss of warranty.
To Next Page
Loading...
Need help?
General
