GB
GROWTH FROM
ONE SIZE TO
ANOTHER - DEPTH
ADJUSTMENT
Follow this description to perform a smoothly
adjustment of the seat depth. Also read the in-
struction on the previous page concerning width
adjustment.
Remove the two bolts (A) at both sides of the
chair.
Take a firm hold of the backrest.
Remove the two bolts (B).
Remount at the desired depth position and re-
place and fasten the bolts (A) and (B).
Do not loosen or remove any bolts not
described above.
To prevent at mix up of bolts, we re-
commend to keep the removed bolts
seperated.
The carer should check and tighten all bolts
at least every month.
21
To Next Page
Loading...
