GB
POSITION THE
BACK BEFORE
TRANSPORTATION
The bush (A) on the gasspring (B) must be hand-
tightened up against the gasspring house before
transportation.
The back MUST be placed in vertical
position and the bush (A) MUST be hand-
tightened before transportation.
TRANSPORT
FITTINGS ON A
BUGGY FRAME
Secure the x:panda seat on a buggy frame in
a vehicle:
* Mount the 4-point strap-type tiedown system
in the vehicle. (Follow the manufactures
instructions)
* Mount the two fittings (A) with the symbol (B)
on both sides of the pushchair frame.
* Secure the chair to the vehicle, using the 4-
point strap-type tiedown system. Use either
a hook or a strap in the fitting (A).
Use a 4-point strap-type tiedown system
approved according to ISO 10542-2 or
SAE J2249.
GB
28
To Next Page
Loading...
