GB
GB
BACK HEIGHT
ADJUSTMENT
Loosen the bolts (A) and (B) to adjust the height
of the back.
Fasten all bolts at the desired height.
Do not remove any of the bolts - only
loosen to adjust.
BACK RECLINE
Release the handle (A) to recline the back.
Firmly grab hold and support the back of
the chair before releasing the handle to
prevent sudden recline.
The release handle is equipped with a security
lock (B). Turn the lock to the left and it is acti-
vated, turn it to the right and it is deactivated.
Always activate the lock after adjustment.
The back on x:panda has dynamic movement.
Move the small ring (C) up or down to adjust the
range of movement.
When reclining the back, please be carefull
not to get fingers caught between the gas
spring and the seat (D).
i
6
To Next Page
Loading...
