GB
HEAD SUPPORTS
Mounting and height adjustment:
Loosen the handle (A).
Angle adjustment:
Loosen the screws (B) and (C) with a spanner.
Sideways adjustment:
Loosen the screw (D).
Fasten all screws at the desired position.
When adjusting the head support, please
be carefull not to get fingers caught bet-
ween the back of the chair and the head
support fiitting.
BACK WIDTH
EXTENSION
ONLY SIZE 4
Mount the back width extension and fasten the
screws (A) on the back. Make sure the extension
is pushed all the way in before fastening.
GB
8
To Next Page
Loading...
