The chair is approved according to ISO
7176/19-2001 and 16840-4:2009.
x:panda seat is approved for transporting
the user in motor vehicles. Please look at
MEASURES in the back of this manual for
the max load. indication.
The approval is not valid on specially made
chairs and frames.
The user should transfer to the vehicle seat
and use the vehicle-installed restraints
system whenever possible.
Seat and frame must be placed in a for-
ward-facing position, when used as a seat
in a motor vehicle. Use an approved 4-point
strap-type tiedown system according to
ISO 10542-2.
Use an approved 3-point belt according to
ISO 10542-1 in the wheelchair. Restraints
should not be held away from the body by
wheelchair components such as armrests
or wheels. It is NOT enough only to use a
hipbelt or vests and belts not approved by
ISO 10542.
The front wheels need to be turned under
the frame so as to be in line wit the frame
before fixation.
All accessories must be removed from the
wheelchair and secured separately in the
vehicle. Accessories which can not be rem-
oved out of consideration of the user, must
be secured to the wheelchair but positioned
away from the user with energy-absorbing
padding placed between the accessories
and the user.
The product should be inspected by the
dealer before re-use following involvment
in any type of vehicle collison.
The following instructions on how to pre-
pare the seat and frame, must be carried
out before transportation.
GB
Restraints should not
be held away from
body by wheelchair
components such as
armrests or wheels
TRANSPORTATION
IN MOTOR
VEHICLES
The x:panda seat on a R82 frame, is approved
for transporting users in motor vehicles, when
the chair and frame are placed in forward-facing
position.
Detailed information about configurations for
frames and x:panda seat, max. load/user weight
and transportation can be found in the overview
"frame_and_seat_combination.pdf".
The overview can be found here:
http://www.r82.org/media/102124/frame_and_
seat_combination.pdf
All information in this chapter must be carried
through to maintain safety.
i
27
To Next Page
Loading...
