INSTRUCTIONS
LU160™ INSTALLATION
RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com
THE LIGHT WILL NOT COME ON
Possible Cause:
•
•
•
if this is a new installation (the pins are not fully seated in the
terminal block)
•
•
•
Solution:
•
•
•
•
•
•
THE LIGHT COME ON DURING THE DAY
Possible Cause:
•
•
•
Solution:
•
•
•
THE LIGHT STAYS ON CONTINUOUSLY
Possible Cause:
• Floodlight is positioned too close to the detector or pointed at
•
•
Solution:
• Reposition the Floodlight away from the detector or nearby
•
•
(Dedicated Circuit)
THE LIGHT COME ON FOR NO APPARENT REASON
Possible Cause:
• The motion sensor may be sensing small animals or
•
•
Solution:
•
•
•
To Next Page
Loading...
