9
able to automatically configure Wireless Network Connection settings on your computer
(every version of Windows starting from Windows XP are configured to “Obtain an IP address
automatically”). For earlier versions of “Zond-12e Advanced” and “Python-3” GPR or if you
for any reason have changed the Wireless Network Connection settings, you will have to
manually configure them to be able to connect to the “Zond-12” and “Python-3” GPRs. To do
so, you need:
For Windows XP:
1. Click the Start button, point to Settings and then click Control Panel.
2. Double click the Network connections icon.
3. Double click your wireless Wi-Fi connection icon and then click the Properties
button
4. Select Internet protocol [TCP/IP] and click the Properties button.
5. For GPRs manufactured after 2015 - click the Obtain an IP address
automatically option and continue from the point 9.
6. For GPRs manufactured before 2015 - click the Use the following IP address
option.
7. Click the IP Address box and enter 192.168.0.2 (if this address is occupied or is not
accessible, you could use any address from 192.168.0.2 to 192.168.0.254, except
occupied address 192.168.0.10. Please, consult with your network administrator
before changing IP addresses).
8. Click the Subnet mask box and enter 255.255.255.0.
9. Press OK button.
10. Press OK button.
11. Click the right button of mouse on your wireless Wi-Fi connection and then click
Connect button.
12. Select Zond-12e or Python network and click the Connect button.
13. If you are using factory deffault Wi-Fi access point settings then follow to the next
point, otherwise chose the secutity method for Wi-Fi connection end enter pass code
if needed.
14. Press OK button.
15. Press Close button.
For Windows Vista / Windows 7:
1. Click the Start button, and then click on the Control Panel.
2. Chose the sub item View network status and tasks, of Network and Internet item.
3. Click the link Change adapter settings in the left part of Network and Sharing
Center.
4. Select your wireless Wi-Fi connection icon and click right mouse button on it. Select
the item Properties of the pop-up menu.
5. Select Internet Protocol Version 4 (TCP/IPv4 and then click the Properties button.
6. For GPRs manufactured after 2015 - click the Obtain an IP address
automatically option and continue from the point 10.
7. For GPRs manufactured before 2015 - click the Use the following IP address
option.
8. Click the IP Address box and enter 192.168.0.2 (if this address is occupied or is not
accessible, you could use any address from 192.168.0.2 to 192.168.0.254, except
occupied address 192.168.0.10. Please, consult with your network administrator
before changing IP addresses).
9. Click the Subnet mask box and enter 255.255.255.0.
To Next Page
Loading...