19
Antialiasing – enables or disables antialiasing when drawing curves (wiggle trace, power
curve etc.).
Languages – choice of the application working language. When supplied, the software is
provided with English, Russian, German, Chinese, Greek and Korean languages (language
files are located in the root folder of “Prism2” software). If you need other language to
support the software, don’t hesitate to contact us at communication addresses listed on the
last page of this User’s Manual.
7.3. Tools – tools and options used for profile handling and tuning purposes. See Section 10 for
more details.
Color palette – creating, saving and selecting color palette for displaying data as a profile.
Gain function – gain function window opening (see. p.23). You may choose the option to
display the trace in gain window or not.
Frequency filter – activation of displayed profile’s lower right column for the fast digital
signals’ in frequency domain filtering run. Frequency filter will be active, if Customized
High Pass Filter was used during data acquisition.
Mouse actions – profile handling tools:
Point info – output of the following parameters values: Trace, Position, Sample, Time
delay, Depth, Amplitude - of the specified point in a profile as well as latitude and
longitude applying positioning by GPS. If there is a mark its number is displayed in
bottom line of the dialog box.
Hyperbola – measuring local object distance and environmental permittivity by the
hyperbola technique, with output of values for the following parameters measured:
Position, Depth, Time delay, Permittivity, Velocity.
Zoom in – selected area magnification.
Zoom out – reverse Zoom in operation.
Fit profile – fitting of the whole profile in one window.
Average spectrum – average signals’ spectrum calculation in a selected area before its
amplification or after they have been gained.
Trace inspection – this option is showing separate profile traces (see Fig.4.1.), it also
allows choosing which curves will stay visible in Trace window (wiggle trace, power
curve, attenuation curve).
Sample inspection– output samples of the same number along profile.
Cut traces - this option is deleting undesirable traces from the data file.
Hodograph – solving a problem of layer-by-layer ground thickness and permittivity
determination using the common depth point within a flat layer model.
Annotations – creating, deleting and editing profile annotations.
Pulse delay adjustment – adjustment of sounding pulse position on time axis.
Lines color – color selection for marks and synthesized hyperbola line.
Marks – adding, deleting and ranking marks on the profile.
Output parameters – profile display parameters output such as Output range, Length of
profile, Output view, Normalizing factor and file heading stored (Text information). You
can also switch on or off displaying of markers and annotations at the profile or leave
annotations only as the final result of probing results interpretation.
GPS Tracker - survey path applying GPS positioning display.
GPS Coordinates Table – display current profile’s editable GPS coordinates table.
Convert to UTM coordinates – latitude / longitude coordinates conversion into UTM
coordinates.
To Next Page
Loading...