Radian RM-111 - Detailed Description of Menu Items; Run Test; Standard Test

RM-111 Operations Manual
Main Menu
Main Menu
4.2 Detailed Description of Menu Items
Run Test
Test Standard - Mode used for testing all standards.
Test Meter - Mode used for testing all meters and testing mechanical standards by pulse counting.
Test Board - Mode used for testing the accuracy of test boards.
Pulse Divider - Mode used for interfacing solid state meters with test boards. It also provides
basic pulse dividing.
Results
View Results - Allows user to view test results. Up to 100 meter and 28 standard test results
can be stored and viewed from the RM-111. The LEFT/RIGHT ARROW keys move among the
different sets of results. The UP/DOWN ARROW keys move within a single result fi eld to allow
all of the result data to be seen.
Print Results - When used in conjunction with the optional RM-RPP Portable
Thermal Printer, the RM-111 can print results on site
Delete Results - Allows for deleting the test results one set at a time. Use the
arrow keys to select the results to be deleted.
Delete All Results - Allows for deleting all test results in one step.
Test Setups
Standard Test
Edit – Allows user to edit all applicable parameters of an existing standard test setup.
Create – Allows user to create a new standard test setup.
Delete – Allows user to delete a standard test setup.
METER TEST
Edit – Allows user to edit all applicable parameters of an existing meter test setup.
19