Radiant R2K 24 - Page 40

40
R2K 24 - RAD - ING - Inst.Manual - 2002.1_CSA
2. FIRST START-UP
SUPPORT CENTER
4. Use the keys ‘ ’ and ‘ ’ of the domestic
circuit
to change the value of the parameter.
5. Press the key ‘
’ to confirm the action and
wait for the display to stop blinking, indicating
the adjustment was implemented.
6. To exit the parameters menu, hold at the same
time the keys ‘
’ and ‘ ’ and wait for the
symbol ‘
’ to appear on the display.
fig. 28
fig. 29
fig. 30