Radio Shack 22-813 - Current, Resistance, and Battery Test Specs

Specifications
22
DC CURRENT (Maximum Measurement: 10A)
40mA
– 400mA ...................... ± 1.2% of Reading,
± 4 in Last Digit
4A
– 10A ................................ ± 1.5% of Reading,
± 4 in Last Digit
AC CURRENT (Average responds, RMS
calibrated, 10A maximum, DC Coupled)
40mA
– 400mA ...................... ± 1.5% of Reading,
± 4 in Last Digit
4A
– 10A ................................ ± 2.0% of Reading,
± 4 in Last Digit
RESISTANCE
400
– 4k – 40kΩ .................... ± 1.2% of Reading,
± 4 in Last Digit
400k
– 4.0MΩ ......................... ±1.2% of Reading,
± 4 in Last Digit
40MΩ ...................................... ± 2.0% of Reading,
± 4 in Last Digit
BATTERY TEST
1.5V C/D/AA (150mA ± 10% load current) ............
± 5.0% of Reading, ± 4 in Last Digit
1.5V AAA (50mA ± 10% load current) ...................
± 5.0% of Reading, ± 4 in Last Digit
9V Battery (10mA ± 10% load current) ..................
± 5.0% of Reading, ± 4 in Last Digit
DIODE MODE
Open Circuit Voltage .............................. < 1.6Vdc
Test Current ................................ 0.8 mA (Typical)
CONTINUITY BEEPER
Continuity (short): .......................<= 50 ± 30 Ohms
Open:.............................................> 50 ± 30 Ohms
Open Circuit: ..........................................<1.6 Volts
Short Circuit Current:................................< 1.0 mA
Beeper Volume (at 5 cm) ..................... 65 dB Min.
(audio scale)