Radio Shack HTX-202 - Using the Power-Save Feature; Preventing Transmissions

a
a
a
a
a
a
EET
:
a
cal
;
USING
THE
POWER-SAVE
FEATURE
To
set
the
transceiver
to
save
power
press
F
+
SAVE
so
that
SAVE
appears
on
the
display.
In
the
power-save
mode,
the
transceiver
turns
on
the
receiver
for
about
32
milliseconds
to
check
for
any
activity,
and
then
turns
off
the
receiver
for
the
time
you
set
with
the
power-save
configuration
setting.
The
factory
default
for
this
setting
is
to
use
only
1/16
the
normal
power.
To
change
the
power
save
setting,
follow
the
steps
in
‘Understanding
the
Configuration
Menu”
to
display
PS.
Then,
rotate
TUNE
to
select
the
power
save
setting.
You
can
set
the
power-
save
setting
to
1-2,
1-4,
1-8,
or
1-16
(1/2,
1/4, 1/8,
or
1/16
normal
power
usage).
D-SQL BEEP REV P-SC
EJ EE
Press
F
+
SAVE
again
to
turn
off
power
save.
Power
save
temporarily
turns
off
while
scanning.
PREVENTING TRANSMISSIONS
To prevent any transmissions using
the transceiver, turn on the transmit
inhibit function. To turn on this func-
tion,
follow
the
steps
in
‘‘Understand-
LE
cf
Ns
o
ing
the
Configuration
Menu
to
display tE. Then, rotate TUNE to
select ON. To enable transmissions, set
this option to OFF.
31