Radio Shack Pro-2032 - Understanding Your Scanner; A Look at the Display

UNDERSTANDING YOUR SCANNER
A LOOK AT THE DISPLAY
The display has several indicators that show the scanner’s current operating
mode. A quick look at the display will help you understand how to operate your
scanner.
MANUAL
MONITOR 123456789 10
DELAY
SCAN
BANK “ — — —
SEARCH at o O o o n n n n n
PROGRAM
PRIORITY P U U LI ch U U UU U U O MHz LOCK-OUT I
MANUAL - comes on when the scan¬
ner is in the manual channel-selection
mode.
MONITOR - appears when you listen
to a monitor memory.
Numbers 1—10 - represent the ten
memory banks and the ten monitor
memories.
delay - appears when the scanner
is set to a channel programmed with
the delay feature. See “Delay".
BANK - appears with bars to the right
to show which channel-storage banks
are turned on for the scan mode. See
“Understanding Channel-Storage
Banks."
SCAN - appears when you scan
channels.
SEARCH - appears during a limit
search (when -L- also appears) or a
direct frequency search (when —d—
also appears).
PROGRAM - appears while you pro¬
gram frequencies into the scanner's
channels.
PRIORITY - appears when you turn
on the priority channel feature.
P - appears when you listen to the
priority channel.
ch - digits that precede this indicator
show which of the 200 channels the
scanner is tuned to.
MHz - digits that precede this indica¬
tor show which of the 31,000 possible
frequencies the scanner is tuned to.
LOCK-OUT - appears when you
manually select a locked-out channel.
10