Radio Shack Pro-2032 - Scanner Operation; Setting Volume and Squelch; Storing Frequencies into Channels

OPERATION
SETTING THE VOLUME AND SQUELCH
1. Push VOLUME to turn on the scan¬
ner.
2. Turn VOLUME to about 2 and
SQUELCH to 10.
3. Slowly turn SQUELCH counter¬
clockwise until you hear a hissing
sound.
4. Adjust VOLUME to a comfortable
sound level.
5. Slowly rotate SQUELCH clockwise
until the hissing stops.
Note: If the scanner picks up un¬
wanted, partial, or very weak trans¬
missions, rotate SQUELCH clockwise
to decrease the scanner’s sensitivity
to these signals.
STORING FREQUENCIES
Follow these steps to store frequencies into channels.
1 .
Press MANUAL. Enter the channel
number you want to program.
□ CD CD;CD CD CD;
E22 C?D Q!CD CD ID I
CD CD CD)! CD CD CD I
CD CD CD : CD • CD'CD*
2 .
Press PROGRAM. PROGRAM appears
on the display.
CD O CD CD CD CD
CD CD CD CD CD CD
CD O CD CD CD CD
CD CD Is? CD CD CD
3. Enter a frequency.
CD
CD
CD; CD CD
CD;
CD CD cd;cd
CD
CD 1
CD CD cd:cd CD
cd;
CD CD CD ; CD CD
CD
Press ENTER to store the frequency.
If you made a mistake in Step 3, Er¬
ror appears on the display. Press
CLEAR and repeat Step 3.
O □ CD CD CD CD
CD CD CD CD CD CD
o cb ED CD CD CD
i - * CD < i CD G3
Repeat Steps 1-4 to program more
channels.
If you want to program the next chan¬
nel in sequence, repeat Steps 2-4.
CD CD CD CD CD CD
CD CD CD CD CD CD
i > CD CD CD CD lL)
CD CD C2 CD CD CD
13