Radio Shack Pro-2032 - Understanding the Keyboard

A LOOK AT THE KEYBOARD
SCAN
UMTT
SPEED
1-20 21-40
41-60
CD
CD
CD
cm
cm
cm
MANUAL
£
PRIORITY 61-80
81-100 101-120
CD
1 _ 1
CD
cm
cm cm
LOCKOUT V
CLEAR
121-140
141-160
161-100
1 _ 1 1 _ 1
CD cm cm cm
DELAY
I I
MONITOR
1 _ 1
PROGRAM
cm
181-200
cm
cm
ENTER
1_1
Your scanner's keys might seem con¬
fusing at first, but a quick glance at
this page should help you understand
each key's function.
SCAN - scans through the pro¬
grammed channels.
MANUAL - stops scanning and lets
you directly enter a channel number.
LOCK OUT - lets you lock out a se¬
lected channel.
DELAY - programs a two second de¬
lay for the selected channel.
LIMIT - used during frequency
searches. See “Searching For and
Temporarily Storing Active Frequen¬
cies.”
▲ - searches up from the currently
displayed frequency.
▼ - searches down from the currently
displayed frequency.
MONITOR - accesses the 10 monitor
memories. See “Moving a Frequency
from a Monitor Memory to a Chan¬
nel."
SPEED - changes the scanning or
search speed from low to high or high
to low.
PRIORITY - sets and turns on and off
priority for a particular channel.
CLEAR - clears an incorrect entry.
PROGRAM - programs frequencies
into channels.
Number Keys - each key has a sin¬
gle-digit label and a range of num¬
bers. The single digit is the number
entered when you enter a channel
number or a frequency. The range of
numbers (21-40, for example) indi¬
cates the channels that make up a
channel storage bank. See “Under¬
standing Channel-Storage Banks."
ENTER - enters program frequencies
into channels.
11