Radio Shack Pro-2032 - Direct Search Functionality

6. Press ▲ to search up from the lower
limit, or press ▼ to search down from
the upper limit.
When the scanner stops on a trans¬
mission, press MONITOR to store the
frequency in the current monitor mem¬
ory, or press ▼ or A to continue the
search.
Note: As you store frequencies in monitor memories, the bar under the memory
number indicates the current monitor memory.
Direct Search
When you are listening to a channel, you can search up or down from the current
displayed frequency, -d- appears on the display during a direct search.
1.
To select a channel into which you
have programmed a frequency, press
MANUAL and the channel number.
3cn S3 MHt
2. Press MANUAL or PROGRAM to enter
the channel number.
Sutfi wSC.CuCoiffe
3. Press A to search up from the chan-
nel’s frequency or press ▼ to search
down.
«OtfTO>
1—* -6- Iscotesm,
E
When the scanner stops on a trans¬
mission, press MONITOR to store that
frequency into the current monitor
memory.
■ ““ * -O- ~%G8uQam,
15