Radio Shack Pro-2032 - Searching and Storing Frequencies; Limit Search Procedure

SEARCHING FOR AND TEMPORARILY STORING ACTIVE
FREQUENCIES
If you do not have a reference to fre¬
quencies in your area, use these pro¬
cedures to search for a transmission.
See also "Guide to the Action Bands'
in this manual.
Note: Press DELAY to make the scan¬
ner pause 2 seconds after a transmis¬
sion ends before proceeding to the
next frequency.
Limit Search
Limit search lets you search within a range of frequencies you select. -L- ap¬
pears on the display during a limit search.
1.
Press PROGRAM, then LIMIT Lo will
appear on the display.
• « jnnnn.
CO JuUUUu Hti;
2 .
Enter the lower limit of the frequency
range.
r
i _ iuunnn
LO ill UUU MM/
3.
Press ENTER, then LIMIT. Hi will ap¬
pear on the display.
H o c rtnnn n
• JOUUUUuUK:
Enter the upper limit of the frequency
range.
H,
•OC. nnrt
i iqouu m:
5. Press ENTER.
Hi IHSuuuO MM/
14