15
CONNECTING AN EXTENSION SPEAKER
In a noisy area, an optional extension speaker (such as RadioShack
Cat. No. 21-549) or an amplified speaker (such as RadioShack Cat.
No. 21-541), positioned in the right place, might provide more comfort-
able listening. Plug the speaker cable’s
1
/
8
-inch (3.5 mm) mini-plug into
your scanner’s jack.
USING THE BELT CLIP
You can attach the supplied belt clip to make the scanner easier to use
when you are on the go. Use a Phillips screwdriver and the two sup-
plied screws to attach the belt clip to the scanner. Then slide the belt
clip over your belt or waistband.
Belt Clip
20-311a.fm Page 15 Friday, February 12, 1999 4:51 PM
To Next Page
Loading...
