FCC Notice
4
help you target frequency ranges
inyourserviceareasoyoucan
search for a wide variety of
transmissions.
FCC NOTICE
Your scanner might cause TV or
radio interference even when it is
operating properly. To determine
whether your scanner is causing
the interference, turn off your
scanner. If the interference goes
away, your scanner is causing it.
Try to eliminate the interference
by:
• moving your scanner away
from the receiver
• connecting your scanner to an
outlet that is on a different
electrical circuit from the
receiver
• contacting your local
RadioShack store for help
If you cannot eliminate the
interference, the FCC requires that
you stop using your scanner.
This device complies with Part 15
of the FCC Rules. Operation is
subject to the following conditions:
(1) This device must not cause
harmful interference, and (2) this
device must accept any
interference received, including
interference that may cause
undesired operation.
Ô
SCANNING
LEGALLY
Your scanner covers frequencies
used by many different groups
Ô NOTE Ô
Mobile use of this
scanner is unlawful or
requires a permit in
some areas. Check the
laws in your area.
To Next Page
Loading...
