Radio Systems Millenium-A Console Page 3
Illus. B-2 Remote Control Wiring (factory default with cue for IFB) ...... 17
Illus. B-3 Remote Control Wiring (“classic” mode) ................................ 18
Illus. B-4 Monitor Board Wiring ............................................................. 19
Six Channel Audio Board ...............................................................20
3.1 Input Connectors ................................................................... 20
3.1.1 Input Wiring .................................................................... 20
3.1.2 Unbalanced Audio.......................................................... 20
3.1.3 Mono Inputs .................................................................. 20
3.2 Input Gain .............................................................................. 20
3.2.1 Channel Sensitivity ....................................................... 20
3.2.2 Input Sensitivity.............................................................. 20
3.3 Patch Point Connections ....................................................... 21
3.3.1 Pre-Fader, Pre-On/Off Patch Point ................................ 21
3.3.2 Post- Fader, Pre-On/Off Patch Point ............................. 21
Illus. C-1 Six Channel Audio Board - 5 Pin ........................................... 22
Illus. C-2 Six Channel Audio Board - RJ-45 .......................................... 23
Illus. C-3 Input Attenuator (IAD) Programming ..................................... 24
Output Board ...................................................................................25
4.1 Overview ................................................................................ 25
4.2 Audio Circuitry ....................................................................... 25
4.2.1 Program and Audition Outputs ...................................... 25
4.2.2 TEL (Telephone) Output ............................................... 25
4.2.3 External Monitor and Headphone Inputs ...................... 25
4.2.4 Headphone Outputs ...................................................... 26
4.2.5 Monitor Sends................................................................ 26
4.3 Control Wiring ........................................................................ 26
4.3.1 Mute and Timer Reset Bus Connections ...................... 26
4.4 Talk Back Connections ......................................................... 27
4.4.1 Intercom ......................................................................... 27
4.5 Internal Adjustments and Input Level Calibration .................. 27
4.5.1 Mix Bus Output Level Adjust .......................................... 27
4.5.2 VU Meter “0” Calibration ............................................... 28
4.5.3 Peak LED Trip Point Calibration ................................... 28
4.5.4 External Monitor Input Level ......................................... 28
4.5.5 Cue Bus External Input Level ....................................... 28
4.5.6 VCA Distortion Null Adjustments ................................... 28
Illus. O-1 Output and Meter Board - 5 Pin ............................................. 29
Illus. O-2 Output and Meter Board - RJ-45 ........................................... 30
Illus. O-3 Auxiliary Control Relay Wiring ............................................... 31
Illus. O-4 Talkback Wiring ...................................................................... 32
Interface Options and Accessories ...............................................33
5.1 Overview ................................................................................ 33
Illus. E-1 Enhanced Remote Interface Card ......................................... 34
Illus. E-2 Selector Logic Card ............................................................... 35