Radiolink Electronic Ltd
www.radiolink.com
When complete the setting, click File on the left top and click “Save OSD file” to save the
set parameters. Next time when the same param. needed, click File and “Open OSD File ”to
directly reach the personalized data.
When open the file and input the saved data to the OSD, click “Save Current Tab to” and
wait for the note of “EEPROM write done”to complete.
4. Font File Update
Click Options and select Update CharSet, then open the OSD Font Library.mcm . The font will
be updated automatically. When the green bar at the bottom moves to the end and note as
“CharSet Done” means charset update complete.
To Next Page
Loading...
