Radiolink Electronic Ltd
www.radiolink.com
Note
Font can be also personalized. Search the edit tool online to edit preferred font. When finish, save
the font in the 256 file, which is the chart bank in system by default. Then input the edit font by
repeat the above steps.
5. Firmware Update
Some flight data of firmware by factory setting may be incorrect, users are very welcomed to
send advice to Radiolink tech-support. We will modify and test and release the updated firmware,
which users can flash with.
（1）Open OSD_uploader in the file of Firmware Upgrade Tool
（2）Select the latest firmware released osd.bin
The system will update automatically once the firmware is opened as below.
Once complete, double click “ENTER”to exit.
Note
When updating the firmware, the OSD module needs to be powered off.
When the firmware is updated, the parameters need to be reset to realize the on-screen
display.
To Next Page
Loading...
