RadioLink Electronic Limited
www.radiolink.com
Display on LCD Screen
When powering on RC4GS V2, Model Name, Subsidiary ID, Transmitter Name, Transmitter
Battery Voltage, Model Battery Voltage, Steering Trim and Throttle Trim will be displayed on LCD
Note The Subsidiary ID won’t display until the function is activated in the menu ID SEED.
The telemetry function of model battery voltage can only be realized with R7FG/R8F.
When binding is done, there’s signal tower on top middle of the screen. As there’s no amplifier
module added on R6FG, the signal telemetry from receiver is about 80m(262.5ft). If the distance
is longer than 80m, the signal tower may disappear but the control range of RC4GS V2 is as long
as 400m(1312ft).
Receiver R6FG(Standard Pack)
Receiver packed with RC4GS V2 is R6FG, 2.4GHz 6 channels, gyro integrated and high voltage
servo supported.
To Next Page
Loading...
