Need help?Do you have a question about the RadioLink RC4GS and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency | 2.4GHz |
| Model Memory | 10 models |
| Modulation Mode | FHSS |
| Screen | LCD |
| Low Voltage Alert | Yes |
| Weight | 320g |
| Modulation | FHSS |
| Power Supply | 6V DC (4 AA batteries) |
| Frequency Band | 2.4GHz |
| Receiver | R4FGM |
| Simulator | Yes |
| Model Type | Car/Boat |
| Battery | 4 AA batteries |
| Operating Voltage | 4.8~8.4V |
Welcome message and overview of the RC4GS system and its features.
Crucial safety guidelines and symbol explanations for using the RC4GS transmitter.
Product warnings regarding age suitability, usage in rain, and FCC compliance.
Details of the RC4GS transmitter components and specifications.
Step-by-step guide for connecting and pairing the receiver with the transmitter.
Explanation of receiver modes and instructions for enabling the gyro function.
Overview of the transmitter's LCD screen, language selection, and basic settings.
Selecting models, adjusting endpoints (EPA), and exponential curves (STEXP, THEXP).
Configuring steering/throttle speed (STSPD, THSPD), acceleration (ACCEL), and ABS braking (A.B.S.).
Setting servo reverse (REV), sub-trim (SUBTR), dual rate (D/R), gyro sensitivity, and fail-safe.
Naming models, setting low voltage alarm, and resetting model data.
To Next Page