To Next PageTo Next Page
Need help?Do you have a question about the RadioLink RC4GS V3 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency | 2.4GHz |
| Model Memory | 10 models |
| Telemetry | Yes |
| Modulation Mode | FHSS |
| Spreading Spectrum | DSSS |
| Screen | 128*64 LCD |
| Low Voltage Alert | Yes |
| Simulator | Yes |
| Weight | 320g |
| RF Power | <20dBm |
| Band | 2.4GHz |
| Display | LCD |
| Fail-Safe | Yes |
| Power Supply | 6x AA batteries or 2S LiPo |
| Adjacent Channel Rejection | >38dB |
| Transmitter Power | <20dBm |
| Operating Voltage | 4.8~8.4V |
| Model Type | Car/Boat |
Details the components and features of the transmitter unit.
Covers the R6FG receiver, its specifications, and integration.
Guides on how to install and bind the receiver to the transmitter.
Details how to set up and adjust the gyro function.
Explains how to monitor battery and receiver voltage.
How to select and manage different model memories.
Adjusts the travel limits for steering, throttle, and other channels.
Implements anti-lock braking for improved cornering.
Allows mixing between arbitrary channels for advanced control.
Sets up alarms for low voltage and signal strength.
Configures fail-safe settings for servos and throttle.
Resets the transmitter to original factory default settings.
Step-by-step guide to update the transmitter firmware.
How to calibrate the steering wheel and throttle trigger.
