RadioLink RC4GS V3 User Manual

Name: RadioLink RC4GS V3
Brand: RadioLink
Rating: 4 (1 reviews)

40 pages

To Next Page

To Previous Page

RadioLink Electronic Limited

www.radiolink.com

4. Turn the wheel and VR knob fully clockwise and then fully counterclockwise. The value of the calibration

interface will change at the same time.

5. After that, press Enter button in the transmitter to confirm. The following OK will appear on the screen,

indicating that the calibration is complete.

6. Turn off the transmitter. It can be used normally when powered on again.

Questions and Answers:

Need help?

Do you have a question about the RadioLink RC4GS V3 and is the answer not in the manual?

General