Need help?Do you have a question about the RadioLink T8S(BT) and is the answer not in the manual?
General| Brand | RadioLink |
|---|---|
| Model | T8S(BT) |
| Category | Remote Control |
| Language | English |
Essential safety guidelines and usage rules for the remote controller.
Overview of the T8S transmitter and R8EF receiver compatibility.
Detailed technical specifications for the T8S transmitter.
List of optional accessories for the T8S remote controller.
Identification and description of the T8S transmitter's physical controls.
Instructions for charging the T8S transmitter's internal battery.
Procedure for calibrating the transmitter's control sticks (gimbals).
Information regarding the R8EF receiver and its features.
Explains the R8EF receiver's output modes and how to switch them.
Guide on how to connect the R8EF receiver to other components.
Best practices for installing the R8EF receiver for optimal performance.
Steps to bind the transmitter to the receiver.
Guide to using the T8S parameter setup application on mobile devices.
Instructions for downloading and installing the T8S parameter setup APP.
Steps to establish a Bluetooth connection between the T8S and the APP.
Overview of the different menus and parameters within the mobile APP.
Guide to using the T8S parameter setup application on a computer.
Instructions for downloading and installing the T8S parameter setup software.
Steps to connect the T8S transmitter to the computer software.
Interface for viewing and adjusting servo ranges and responses.
Core settings for transmitter functions.
Adjusting the direction of servo response for each channel.
Fine-tuning the neutral position of servos.
Setting the maximum travel range for servos on each channel.
Configuring fail-safe behavior in case of signal loss.
Adjusting servo response synchronization timing.
Assigning functions to auxiliary channels using switches.
Advanced configuration options for transmitter functions.
Adjusting control sensitivity (rates) with a switch.
Setting up different flight attitudes or modes.
Configuring elevon (delta wing) mixing for aircraft control.
Configuring V-tail mixing for aircraft control.
Setting up custom programmable channel mixes.
Adjusting the throttle curve for motor response.
System-wide settings and configurations.
Configuring transmitter voltage and signal strength alarms.
Selecting and customizing stick modes (e.g., Mode 1, 2, 3, 4).
Restoring the transmitter to its factory default settings.
Checking the current firmware version of the T8S transmitter.
Comprehensive guide to upgrading the T8S transmitter firmware.
Instructions for installing necessary drivers for firmware upgrades.
Process for downloading the firmware utility and performing the upgrade.
To Next Page
