RadioLink Electronic Limited
www.radiolink.com
34
The firmware can be downloaded from https://radiolink.com/t8s_firmwares .
After selecting the correct firmware, make sure that “APROM” is selected in the “Program”, and then
click “Start”.
When the green “PASS” appears, it means that the firmware flashing is successful.
Thanks
Thank you for purchasing RadioLink 8-channels remote controller T8S. Please read the manual
carefully and set up the device as instructed steps.
If any problems found during the operation process, contact your local dealer or contact us by e-
mail at: after_service@radiolink.com.cn .
Visit our website at: www.radiolink.com to get online support.
To Previous Page
Loading...
Need help?
General
