Need help?Do you have a question about the RadioLink T7F-2.4Ghz and is the answer not in the manual?
General| Frequency | 2.4GHz |
|---|---|
| Channels | 7 |
| Modulation | GFSK |
| Brand | RadioLink |
| Alternative Power Supply | 4 x AA batteries |
Displays the selected aircraft type (ACRO) and flight mode (HL).
Shows the current servo reverse setting for a selected channel.
Adjusts the overall travel rate for a selected channel.
Modifies the control response curve for smoother control.
Sets the maximum travel limits for servo channels.
Fine-tunes the neutral position of control surfaces.
Configure throttle curves for normal flight mode.
Set up a custom mixer for advanced control linkages.
Configure a second custom mixer for advanced control linkages.
Configure dual aileron or flaperon control for aircraft.
Adjust trim for flap control surfaces.
Configure mixing for V-tail aircraft control surfaces.
Configure mixing for elevon control surfaces on delta wings.
Assign and configure functions for auxiliary channels.
Configure pitch curves for helicopter main rotor control.
Configure throttle curves for helicopter idle-up mode.
Configure pitch curves for helicopter idle-up flight mode.
Engage or disengage throttle hold function for safety.
Configure mixing between pitch and rudder for helicopters.
Configure and adjust gyro sensitivity and mode.
Select swashplate type for helicopter cyclic and collective control.
To Next Page
