Need help?Do you have a question about the RadioLink RC8X and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Frequency | 2.4GHz |
| Modulation | FHSS |
| Telemetry | Yes |
| Spreading Spectrum | DSSS |
| Antenna Type | Dual Antenna |
| Output Signal | PWM, PPM, SBUS |
| Low Voltage Alert | Yes |
| Simulator | Yes |
| Battery Type | LiPo |
| Voice Alerts | Yes |
| Display | 3.5 inch color screen, 320*480 resolution |
| Frequency Band | 2.4GHz |
| Operating Voltage | 3.5-4.2V |
| Channel Resolution | 4096 |
| Model Type | Helicopter, Airplane, Glider, Multirotor |
| Compatible Receivers | R8EF, R6FG, R4FGM, R4F |
| Battery | 3.7V 3000mAh LiPo |
Overview of RC8X features, specifications, package contents, and button layout.
Essential safety instructions for using the transmitter to prevent accidents and damage.
Details on R8FG receiver features, binding, connection, and antenna installation.
Customizes display, sound, backlight, vibration, LED, and battery settings.
Configures trims, dials, switches, timers, screenshots, and charts.
Manages receiver selection, channels, throttle modes, and fail-safe settings.
Monitors sensor data like receiver signal, voltage, and broadcasts status via voice.
Fine-tunes steering, throttle, and brake response with curves and speed settings.
Combines channel inputs for advanced control like steering, braking, gyro, and ESC mixing.
Manages models, SD card content, and firmware updates.
Guides on converting the transmitter for left-hand operation.
Details adjustments for trigger and wheel tension, slide, and brake lever.
Instructions for updating the RC8X transmitter's firmware for new features.
To Next Page
