RadioLink Electronic Limited
www.radiolink.com
Attention:
4
Do not pull or insert the SD card during taking screenshots.
5
It is not supported to rename the screenshots or delete the screenshots directly in the
transmitter.
6
The charging USB cable that without data transmission function cannot be used to make
your transmitter and the computer connects success, please use a USB data cable to connect.
7
All files in the SD card only support English, not other languages. If you rename it to
another language, the file name will be garbled when you going to preview the screenshots files
in the transmitter.
8
If the SD card is pulled out and the contents have been modified, you need to insert the
SD card into the transmitter and then restart the transmitter to see the modified content in the
SD card.
2.2.4 Timer
In the timer setup menu, the alarm time, timer mode,
alarm sound type, the switch to trigger the timer, the switch
for resetting the timer, vibrator type, and throttle trigger to
a timer can be set.
Setting steps: turn on the RC8X, into home page, click
the button at the left bottom of RC8X into System
menu, click into Tools menu, click the blue select box
named Timer to set the timer mode etc. Click “-“ can
decrease the value and click “+” can increase the value.
To Next Page
Loading...
Need help?
General
