RadioLink Electronic Limited
www.radiolink.com
2.1.6 Vibration setting
Vibration by touch: The word is ON, and the select box's background color is blue indicate
the vibration function is turned on. The word is OFF, and the select box's background color is
grey indicate the vibration function is turned off. The vibration function is default turn off.
If the vibration by touch function is turned on, the transmitter will vibrate accompanied by
the sound you have preset when you tap the screen and warn.
Touch sense: The touch sense is default 20%, it can be adjusted from 10% to 100%. Users can
hardly feel the vibration if they set the value of touch sense to 10%, the larger the value, the
stronger the vibration. Click “-“ can decrease the value and click “+” can increase the value.
Warning sense: The warning sense is default 20%, it
can be adjusted from 10% to 100%. Users can hardly feel
the vibration if they set the value of warning sense to 10%,
the larger the value, the stronger the vibration. Click
“-“ can decrease the value and click “+” can increase
the value.
Setting steps: turn on your RC8X, click the button at the left bottom of RC8X into
System menu, or click the blue select box named Vibration setting to turn on or turn off the
vibration function. In this menu, touch sense and warning sense can be set. Click “-“ can
decrease the value and click “+” can increase the value.
Reset: click Reset will make the value back to the default number.
Back: click the button or short press the power button to return to the previous menu.
To Next Page
Loading...
Need help?
General
