RadioLink RC8X - Switch Select

RadioLink Electronic Limited
www.radiolink.com
48
Stop audition: The button at the bottom of the screen is OFF, and the background color of
the select box is grey, indicating that when selecting the buzzer or warning voice, the transmitter
will broadcast the prompt tone that you have selected.
The button at the bottom of the screen is ON, and the background color of the select box is
blue, indicating that when selecting the buzzer or warning voice, the transmitter will not
broadcast the prompt tone that you have selected.
This stops trial listening function only applies to the Key tone-setting menu.
2.2.2 Switch select
Switch select
This function is for function settings of all the PS buttons, steering wheel, and throttle trigger.
Click 1/2 at the top right corner to switch the setting menu. For details of all the buttons,
please refer to 1.2.5 Buttons Introduction.
Function: PS1, PS2, PS3, PS4, PS5, Steering switch, and Trigger switch can be customized to
control the functions as below: Condition1/2, Condition1, Condition2, Condition3, Condition4,
Program. Mixing1/2/3/4/5/6/7/8, A.B.S(brake1/2/3), Traction control, 4WS type switching, 4WS
type1(front), 4WS type2(reverse), 4WS type3(same), 4WS type4(rear), Dual ESC (front/4WD/rear),
Gyro mixing, Gyro gain, Gyro gain group, CPS mixing1/2/3/4, Brake, Start, Engine cut, Idle up,
Neutral brake, Timer start, Timer reset, Screen capture, Backlight, Telemetry speech, Stop speech.
If you select “NULL”, it means will do not trigger any function except the default function when
pressing this button.
Attention: since the buttons PS1, PS2, PS4, PS5 have occupied by default, if you need to