RadioLink RC8X User Manual

RadioLink Electronic Limited
www.radiolink.com
154
Thanks
Thank you so much for choosing RadioLink 2.4 GHz 8 channels transmitter – RC8X.
To fully enjoy the benefits of this product and ensure safety, please read the manual carefully
and set up the device as instructed steps. If any problems found during the operation process,
either way listed below can be used as online tech support.
1. Send mails to after_service@radioLink.com.cn and we will answer your question at the
earliest.
2. Send private message to us on our Facebook page or leave comments on our YouTube
page.
3. If the product is purchased from the local distributor, you can also ask them for support
and repair as prefer.
A 4G SD card will be packed with RC8X, it can be used for transmitter upgrade or save the
font, icon, screenshot, sound, and other customized files you have designed for your RC8X.
All manuals and firmware are available on RadioLink official website www.radiolink.com and
more tutorials will be uploaded. Follow our Facebook and YouTube homepage to stay tuned with
our latest news.

RadioLink RC8X Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Telemetry	Yes
Spreading Spectrum	DSSS
Antenna Type	Dual Antenna
Output Signal	PWM, PPM, SBUS
Low Voltage Alert	Yes
Simulator	Yes
Battery Type	LiPo
Voice Alerts	Yes
Display	3.5 inch color screen, 320*480 resolution
Frequency Band	2.4GHz
Operating Voltage	3.5-4.2V
Channel Resolution	4096
Model Type	Helicopter, Airplane, Glider, Multirotor
Compatible Receivers	R8EF, R6FG, R4FGM, R4F
Battery	3.7V 3000mAh LiPo